Green Galaxy Water Based Ink Gallon Kit

$904.50
SKU IKKT-GGALAXYWBKIT-G

After traversing every corner of the Green Galaxy, we've collected thebest and most valuable hues into one water based ink kit. Sustainable,friendly to both printer and planet, and economically priced - GreenGalaxy inks are taking the universe by storm. Now you can take home allthe colors of the universe. Kit includes 14 water based Green Galaxy inks.

This kit includes:

  • Green Galaxy Asteroid Orange - Gal.
  • Green Galaxy Light Speed Lime - Gal.
  • Green Galaxy Proton Purple - Gal.
  • Green Galaxy Starburst Yellow - Gal.
  • Green Galaxy Cosmic Pink - Gal.
  • Green Galaxy Terraform Green - Gal.
  • Green Galaxy Galactic Gold - Gal.
  • Green Galaxy Nebulous Navy - Gal.
  • Green Galaxy Supernova Blue - Gal.
  • Green Galaxy Neptune Blue - Gal.
  • Green Galaxy Martian Green - Gal.
  • Green Galaxy Mars Red - Gal.
  • Green Galaxy Comet White - Gal.
  • Green Galaxy Pitch Black - Gal.
  • Green Galaxy Warp Drive Low Cure Catalyst - 8oz

General Information:

Ready-to-use print water based ink for printing on light or dark cotton and other non dye migratingfabrics. Can be printed on dark polyester or dye migrating fabrics withuse of compatible low cure catalyst.

Mesh Guidelines:

Can be used with any mesh between 110-305

Stencil/Emulsion Guidelines:

We recommend using either a water resistant emulsion like Ryonet WBP or using an emulsion hardener like Ryonet Harden-X.

Mixing info:

This product can be mixed with transparent and covering ink from the AB series.

Printing Instructions:

Loadscreen with plenty of ink. Flood screen prior to printing. Green Galaxy ink can be printed with a push or pull squeegee stroke. Afterprinting, flood screen allowing ink to sit on top of image to avoiddrying. If screen clogs or exhibits dry ink in the print, re-flood andaggressively print again, this should clear the screen. If it does notclear the screen, spray a small amount of warm water into the stuckareas of the screen and wipe out with a rag. If you are leaving yourscreen for an extended period of time be sure to leave your screenflooded completely. If your ink begins to scale over, spray with waterto rewet ink.

Flashing Instructions:

For flashing, forced air flash is optimal. Flash until dry to the touch.

Curing Instructions:

Printedfabric should be cured for a minimum of 90 seconds at 360°F. Ideally,printed fabric should be cured for three minutes at 300–320°F.

Testing/Precautions:

Afterprinting, perform a stretch test to ensure elasticity. It is alwaysrecommend to perform a wash test to ensure proper cure prior to goinginto production. You may also run abrasion testing to watch for flakingand test adhesion. Increase cure dwell time if testing fails.

Clean Up:

Inkshould be removed from screen as soon as printing is completed. Generalwash-up (on ink that has not dried) can be done with water, thoughusing Enviro-Solve is much easier and recommended. For aggressive ordried screens, use Enviro-Solve to dissolve ink and blast out areas ofstuck ink with water pressure.

Storage info:

Keep container(s) tightly closed. Store in cool, well ventilated location that is locked.

General Safety Precautions:

Donot breathe vapors. Wear protective gloves. Do not eat, drink or smokewhen using product. Wash hands thoroughly after handling. Dispose ofthis product in accordance with local, regional, national andinternational regulations as specified.